Report item
Item specifics
  • Gender: Female
  • Use: Bikini,Body,Face,Underarm
  • Material: ABS
  • Size: Permanent Hair Removal
  • Model Number: Laser epilator
  • Item Type: Razor
  • Operating Voltage: 110-240V
  • Plug Type: US EU UK plug
  • Features: Permanent Hair Removal/Photorejuvenation/Remove acne
Product Description







3 in1 Whole Body Bikini IPL Laser Permanent Hair Removal System Epilation Removal Acne Photorejuvenation Flashes DHL UPS Ship


Free gift "300W mini travel hair dryer"









  We are the Official Shop, 100% original 
  Pay today, tomorrow shipment. DHL Ship
2016/08/22 Our products have been upgraded, flash rate 5-6 seconds! Processed faster! Updated detailed user manual (English, French, Russian ....).  Only our shop have a detailed user manual. It has 79 pages, very detailed!



















  Women\'s No 1 choice - 80% of women preferred Lumea to their conventional hair removal method, because it\'s fast, effective and convenient.
  Fast - Wider 4 cm2; application window with new Slide & Flash mode for even faster application as well as Step & Flash mode for precision treatment.
  Effective - Up to 80% reduction in hair regrowth in just 8 weeks; then simply repeat treatment as necessary to prevent re-growth.
  Specialised - New bikini area attachment improves performance.
  Convenient - Advanced Salon technology for use at home at a time to suit you. Rechargeable, ready to use, no gels or accessories needed.
  Versatile - Suitable for body and now for the face too. 5 light energy settings - suitable for most skin tones and hair colours.

Application areas and Treatment
Time Use with confidence to remove hair on all body parts including legs, underarm, bikini area, stomach and arms.
The first stage (use twice a week) Three weeks of continuous use.
The second stage (once a week) Two weeks of continuous use.
The third stage (two weeks used once) Interval of 2 weeks, used once. At this time the hair does not grow, fall off.

Light-based hair removal is one of the most effective methods to treat unwanted body hair with longer-lasting results.  It is different from current home hair removal methods because it significantly reduces hair regrowth.  You can now use this innovative technology comfortably in the privacy of your own home, whenever and wherever you want.


Intended use
This appliance is intended for the removal of unwanted hair. It is able to deliver long-term reduction in the number of hairs that regrow after treatment. You can use it to remove unwanted body hair on all areas below the cheekbones, including the face (upper lip, chin and cheeks). This appliance has been specifically designed and optimized for use by women, but can be used by men as well. It is designed for use by one person only.


Working principle
 - The appliance works by heating up the hair and root beneath the skin. The melanin in the hair and hair root absorbs the released light pulses. The darker the colour of the hair, the more light can be absorbed. This process stimulates the hair to go into the resting phase.
 - In between treatments, hair sheds naturally and regrowth is inhibited. Hairs can take one or two weeks to shed.
 -  Optimal hair removal cannot be obtained with a single session, since only hairs in the growing phase are susceptible to treatment with light. During a treatment, hairs on the treated area are usually in different stages of the hair growth cycle. To effectively treat all hairs you have to repeat the treatment once every two weeks for the first two months.







1.On/off/intensity button, short press for intensity adjustments, long press for shutting off
2.Light intensity indicator, form 1-5, 5 lights for maximal intensity
3.Charging indicator, flashing indicates charging in progress, steady light means charging ready
4.Skin contact indicator , steady light means acceptable skin contact
5.DC power inlet
6.Ventilation holes
7.flash button  Press the flash button to release a flash.
8.Exchangeable flash head
9.Power adaptor



Preparing for use

For optimal results and greatest effect, prepare the areas on which you intend to use the appliance in the manner described below.

Preparing treatment areas

 1   Shave the areas you intend to treat as long as you still experience hair regrowth.

Note: If your last depilation method involved removing hairs by the roots (e.g epilating, waxing etc.), wait until you notice significant hair regrowth before you use the device. Do not use depilatory creams instead of shaving.

Please note that treatment on unshaved or improperly shaved areas has a number of undesired effects:

  - The light exit window and attachment may become contaminated with stray hairs and dirt. A contaminated light exit window and can reduce the life and efficacy of the appliance. In addition, burns or black spots that appear on the light exit window and attachments due to contamination can cause the treatment to become painful or cause skin reactions like redness and discolouration.

  - Hairs on your skin can burn, which can result in an unpleasant smell

2   Clean your skin and make sure it is hair-free, entirely dry and free from oily substances (e.g. present in cosmetic products like deodorants,  lotions, perfumes, tanning creams and sunscreens).

3   Check the appliance, especially the light exit window for trapped hair, dust and fibres. If you see any contamination, clean the appliance.


  - Once the hairs stop growing back, which usually happens after  4-5 treatments, you no longer have to shave before you use the appliance


Setting the light intensity

This appliance is an appliance developed for consumer use at home and therefore not comparable with professional light-based appliances with respect to pain sensation.  The pulses of light delivered by this appliance are gentler than those from professional appliances and therefore you can expect a convenient and effective treatment. You have to adjust the light intensity to your skin and body hair colour and to a level you find comfortable. The recommended light intensities table below helps you to establish the right light intensity

 1   Consult the table below to determine which light intensities are most suitable for your skin and body hair colour and to check if this method is suitable for you (if it is not, this is indicated with x in the table).

 2   Each body area and possibly even parts of a body area may require a separate appropriate light intensity according to the recommended light intensities table below. The method is more effective at higher intensities, but you should reduce the light intensity if you experience any pain or discomfort.

Note: The required light intensity for different body areas may vary due to different skin colours. For example, the skin of the lower legs can be darker than the skin of the underarms due to more sun exposure. Persons with darker skin run a higher risk of skin irritation because their skin absorbs more light. Therefore lower intensities are recommended for persons with darker skin.

In the table below, "x"means that the appliance is not suitable for you.




Subsequent use

1  Before every treatment, clean the light exit window.

2   Press the on/off button to switch on the appliance.

Note: It is normal that the appliance and the attachment become warm during use.

3   Start each treatment by selecting the light intensity very carefully, based on your skin\'s sensitivity and on how comfortable treatment feels.

4   Press the on/off button to cycle through the 5 intensity settings.

5   Place the appliance at a 90° angle on the skin so that the light exit window is in contact with the skin.

The charge ready indicator\' light on the back of the appliance become a steady green when the device is fully charged, and the Skin contact indicator become steady when good contact with skin is established. This may take a few seconds.

6  Press the flash button to release a flash. Now you have 2 options to release the next flash:

A   Keep the flash button pressed. The appliance releases one flash after another as long as the flash head is in full contact with the skin. Immediately after the appliance has flashed, slide the appliance to the next area.

B   Let go of the flash button after each flash. For the next flash, place the appliance on the area right next to the previously flashed area. 


Note: The visible light produced by the appliance is the reflection of the flash on the skin and is harmless to your eyes. It is not necessary to wear goggles during use.

7   Switch off the appliance after you have finished the treatment.

8   Check the light exit window for hairs and dirt and clean the appliance after use.


How to achieve optimal results

  - It is normal that hairs are still visible after the first few treatments

  - To remove all hairs successfully and prevent the hair follicle from becoming active again, the treatments have to be repeated once every two weeks for the first two months. Your skin should be smooth by then.. 


Maintenance phase

  - To ensure that your skin stays smooth, we advise you to repeat the treatment every 4 to 8 weeks. The time between treatments may vary based on your individual hair regrowth and also across different body areas. If too many hairs grow back between treatments, simply shorten the treatment interval again, but do not treat any area more often than once every two weeks. When you use the appliance more frequently than recommended, you do not increase the effectiveness but you do increase the risk of skin reactions.


Cleaning and maintenance

To ensure optimal results and a long life for the appliance, clean the appliance before and after each use and, if necessary, also during the treatment. The appliance loses its effectiveness if you do not clean it properly.

1   Switch off the appliance, unplug it and let it cool down.

2   Moisten a soft cloth with a few drops of water and use it to clean the following parts:

  - the light exit window

  - the filter glass

Note: If water does not clean effectively, use a few drops of high-percentage alcohol to clean the parts mentioned above.



 1   Switch off the appliance, unplug it and let it cool down.

 2   Clean the appliance before you store it.

 3   Store the appliance in a dust-free and dry place at a temperature between 0°C and 60°C.

Technical specifications       

Rated voltage 100V-240V

Rated frequency 50Hz-60Hz

Rated input 35W

Protection against electric shock Class II Q

Operating conditions Temperature: +15° to +35°C

Relative humidity: 25% to 95%

Storage conditions Temperature: 0° to +60°C

Relative humidity: 5% to 95%

Spectrum of hair removal flash head >470nm

Spectrum of skin smoothing flash head >570nm

Spectrum of anti-acne flash head >430nm


 Packing List
1* IPL Permanent Hair Removal device
1* Hair Removal flash lamp
1* Remove acne flash lamp
1* Photorejuvenation flash lamp
1* AC Adaptor EU US UK AU Plug
1* Safety Glasses
1* User\'s manual(English Russian French ......)

If you choose free dhl service, please avoid the following:
1. Incorrect contact address and telephone number.
2. The address is not in dhl scope of services and the scope of delivery.
3. reject the parcel.
If the above reasons, the package could not be delivered, we will not have any refund, all the losses borne by the buyer. When you choose dhl free service, indicating that you agree to accept our terms.










aeProduct.getSubject()      Shipment
  1. Worldwide freeShipping.
  2. Orders processed within 4 days after payment is made and verification.
  3. We will arrange the shipment according to the address the buyer provided, So please confirm and check the address details you filled when purchase.
  4. The shipping method we offered is China Post Air Mail, so if you want to choose DHL, UPS, FEDEX, TNT, EMS, please contact us before purchase.
  5. Service Transit Time is provided by the carrier, weekends and holidays are excludes, so the shipping time may be longer than we promised, particularly during the holiday season, so please be patient.
  6. Any tracking information updated will inform you in time, you can also get the tracking information from official website.
  7. Any extra custom duties or import taxes are not included.
aeProduct.getSubject()      Return&Refund
  1. If you have returned the product to us, Please provide the tracking number to us.
  2. All returned items must be in the original packaging and condition.
  3. If the orders haven\'t arrived in time, please contact us, we will arrange a reshipment or a refund for you.
  4. If you want refund, please contact with our customer service and don\'t open a dispute directly.
aeProduct.getSubject()       Feedback
  1. Feedback is very important for us, we strive for 100% satisfaction, if you have any questions or problems, please contact us first , we will solve it quickly and in the best way.
  2. Please leave us positive feedback and give all 5 stars if you are satisfied with our products, your highly recommend is our motivate to move further, we will really appreciate your time if you left positive feedback.



Packaging Details
  • Unit Type: piece
  • Package Weight: 1.0kg (2.20lb.)
  • Package Size: 40cm x 35cm x 20cm (15.75in x 13.78in x 7.87in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 1.0kg (2.20lb.)
  • Package Size: 40cm x 35cm x 20cm (15.75in x 13.78in x 7.87in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.